FRC-232

This converter is designed to provide a RS-232 point-to-point connection over fiber optic cable where the connected devices have RS-232 interface. It extends distance between Data Terminal Equipments (DTEs) or between Data Terminal Equipment (DTE) and Data Communication Equipment (DCE) up to 2000 meters over multimode 850nm, 62.5/125 Microns Fiber. An optional Singlemode converter delivers up to 15Km, 30Km and 60Km over 1300nm, 9/125 Microns Fiber.

Features:

Complies with EIA/TIA-232E, EIA/TIA-574 & CCITT V.28 standard

Extended distance up to 2Km over multimode cable

Support asynchronous data transfer rate up to 120kbps.

Extended distance up to 15Km, 30Km and 60Km over Singlemode cable

Support DTR, DSR, RTS, CTS handshaking signal

Push-button switch to select DTE & DCE

Available with ST/SC for Multimode and SC for Singlemode

Status LEDs for PWR, LNK, RCV to easily monitor network activities

Dip switch to set up local loopback and remote loopback for easy problem identification

External Power Adapter

FCC Class B & CE Approved

　

Specifications:

Standard:

EIA/TIA-232E, EIA/TIA-574 & CCITT V.28

Connector:

DB-9 for RS-232; ST/SC for Multimode, SC for Singlemode

Max Distance:

Copper : up to 15 meter (Max distance of copper depends on the quality of cable used and data transfer rate)

Fiber:

2000 meters (Multimode)

15000 meters (Singlemode)

30000 meters (Singlemode)

60000 meters (Singlemode)

Unit LED:

PWR:

Illuminated for normal operation

LNK:

Illuminated green when system synchronization succeeded and fiber transmission paths are symmetrical link

RCV:

Illuminated yellow for receiving packets from DTE or DCE

Operating Requirement:

Power:

External Power Adapter

Voltage:

AC Voltage to 12DC @ 0.8A

Frequency:

50Hz to 60Hz

Temp.:

Operating: 0℃ to 70℃

Storage: -20℃ to 70℃

Humidity:

Operating: 10% to 80%RH, non condensing

Storage:5% to 90%RH

Emission:

FCC Part 15 of Class B & CE Approved

Physical:

Dimensions:

110 x 68 x 23 mm (L x W x H)

Weight:

150g (Net Weight, Converter Only)

	Complies with EIA/TIA-232E, EIA/TIA-574 & CCITT V.28 standard			Extended distance up to 2Km over multimode cable
	Support asynchronous data transfer rate up to 120kbps.			Extended distance up to 15Km, 30Km and 60Km over Singlemode cable
	Support DTR, DSR, RTS, CTS handshaking signal			Push-button switch to select DTE & DCE
	Available with ST/SC for Multimode and SC for Singlemode			Status LEDs for PWR, LNK, RCV to easily monitor network activities
	Dip switch to set up local loopback and remote loopback for easy problem identification			External Power Adapter
				FCC Class B & CE Approved

Specifications:
	Standard:	EIA/TIA-232E, EIA/TIA-574 & CCITT V.28
	Connector:	DB-9 for RS-232; ST/SC for Multimode, SC for Singlemode
	Max Distance:	Copper : up to 15 meter (Max distance of copper depends on the quality of cable used and data transfer rate)
		Fiber:	2000 meters (Multimode)
			15000 meters (Singlemode)
			30000 meters (Singlemode)
			60000 meters (Singlemode)
	Unit LED:	PWR:	Illuminated for normal operation
		LNK:	Illuminated green when system synchronization succeeded and fiber transmission paths are symmetrical link
		RCV:	Illuminated yellow for receiving packets from DTE or DCE
Operating Requirement:
	Power:	External Power Adapter
	Voltage:	AC Voltage to 12DC @ 0.8A
	Frequency:	50Hz to 60Hz
	Temp.:	Operating: 0℃ to 70℃
		Storage: -20℃ to 70℃
	Humidity:	Operating: 10% to 80%RH, non condensing
		Storage:5% to 90%RH
	Emission:	FCC Part 15 of Class B & CE Approved
Physical:
	Dimensions:	110 x 68 x 23 mm (L x W x H)
	Weight:	150g (Net Weight, Converter Only)